Skip to main content
Boards

BeagleBoard.org BeagleV

By February 1, 2021No Comments

BeagleBoard.org BeagleV

BeagleV™ will be available for early access in March with volume availability in September. The early access version encompasses cutting-edge technology, including powerful AI performance (3.5T NVDLA, 1T NNE), built-in ISP/NNE, PCle 3.0, Gigabit Ethernet, and a dual-core 64-bit RISC-V CPU with 8GB of LPDDR memory. It also has a dedicated hardware encoder/decoder supporting H.264 4k@60fps making it a perfect edge computing device with powerful AI capability. Supported by mainline Linux and a Debian-based BeagleBoard.org® open-source software image, BeagleV™ is ready for development out-of-the-box and prepared for the future.
This board will be available for pre-order by March, 2021 through Seeedstudio.

Features

  • Processor:
    • RISC-V U74 Dual core with 2MB L2 cache @ 1.0GHz
    • Vision DSP Tensilica-VP6 for computing vision
    • NVDLA Engine 1 core (configuration 2048 MACs@800MHz )
    • Neural Network Engine (1024MACs@500MHz)
  • 8GB LPDDR4 (2 x 4GB LPDDR4 SDRAM) (4GB version in development)
  • Video:
    • Video Decoder (H264/H265) up to 4K@60FPS; Support Dual stream decoding for 2K@30FPS each
    • Dual channels of ISP, each channel support up to 4K@30FPS
    • 2 x MIPI-CSI, 1 x MIPI-DSI
    • 1 x HDMI support up to 1080P@30fps
    • Support MIPI-CSI TX for video output after ISP and AI processing
    • JPEG encoder/decoder
  • Peripherals:
    • 4 x USB 3.0 Ports
    • 1 x Gigabit Ethernet
    • 1 x 3.5mm Audio jack
    • Support TRNG and OTP
    • Support DMAC, QSPI and other peripheral
    • Dedicated Audio Processing DSP and sub-system
    • 40 Pin GPIO Header (28 x GPIO, I2C, I2S, SPI, UART)
    • System boot from SD card
    • 1 x Wi-Fi 2.4GHz b/g/n and Bluetooth 4.2
    • Power with USB Type-C (5V@3A)
    • 1 x Reset button and 1 x Power Button

Important Links

Stay Connected With RISC-V

We send occasional news about RISC-V technical progress, news, and events.