Skip to main content

RISC-V Exchange

The RISC-V Exchange hosts the hardware, software, services, and learning offerings in the RISC-V community. Browse the list or search for an offering below.

RT-Thread MangoPi-Nezha MQ

Organization: RT-Thread

MangoPi-Nezha MQ is an open-source RISC-V development board that integrates Wi-Fi connectivity and dual USB Type-C ports into one tiny (4x4 cm) package. Powered by the Allwinner D1s chip, it provides support for rich display interfaces like RGB, DSI, and LVDS. It also includes onboard silicon microphones and class-D amplifiers for audio output. Firmware & Software: MangoPi-Nezha MQ runs Tina Linux, an OpenWrt-based embedded system. Combined with the LVGL open-source graphics library, this platform allows you to take full advantage of the board’s hardware features. An optimized Debian Linux distribution is available as well. We’ve also implemented support for xboot and RT-Smart, a high-performance microkernel operating system for professional, real-time applications. RT-Smart provides an open-source foundation for all kinds of embedded devices, whether you’re working in consumer electronics, security, industrial control, or some other sector that relies on embedded technology (which, these days, is pretty much every sector). Microkernels fill the gap between traditional real-time operating systems (RTOSs) and heavier solutions like Linux. As a result, platforms like RT-Smart tend to do a better job of balancing real-time performance, cost, security, and startup speed. And if you’re new to these technologies, MangoPi-Nezha MQ is not only a perfect way to get started with RISC-V, it’s also a great introduction to Linux and to microkernels! Features & Specifications: Powered by a D1s (a 1 GHz D1 chip with a C906 core, a RISC-V architecture, and 64 MB of storage), USB Type-C support for USB-OTG & USB-HOST, 2 x 22 pin-expansion headers Solder points for NAND/NOR flash as storage or system ROM, MicroSD card slot, On-board RTL8189-based Wi-Fi, 15-pin universal Raspberry Pi DSI FPC, 40-pin universal RGB FPC (4-Wire resistive-touch interface included), 6-pin universal capacitive touch FPC, On-board mic, Audio output, 24-pin DVP interface (usable as RMII), BOOT & Reset buttons, 4 fixed assembly feet, 4x4 cm


D1 Development Board — Nezha

Nezha is a AIoT development board customized by AWOL based on Allwinner’s D1 chip. It is the world’s first mass-produced development board that supports 64bit RISC-V instruction set and Linux system. Features Main control: Allwinner D1 C906 RISC-V 1GHz DRAM: DDR3 1GB/2GB Storage: Onboard 256MB spi-nand, support USB external U disk and SD card to expand storage Network: Support Gigabit Ethernet, support 2.4G WiFi and Bluetooth, onboard antenna Display: Support MIPI-DSI+TP screen interface, support HDMI output, support SPI screen Audio: Microphone daughter board interface * 1, 3.5mm headphone jack * 1 (CTIA) Board size: length 85mm *width 56mm *thickness 1.7mm PCB layer: 6 layers Support Tina Linux,based on Linux 5.4 kernel


Updates and edits to existing entries, as well as contribution of new entries, are welcome! Please submit your inputs here.

Stay Connected With RISC-V

We send occasional news about RISC-V technical progress, news, and events.