Skip to main content
In the News

$39 MangoPi-Nezha MQ RISC-V developer board runs OpenWrt, Debian, or RT-Smart RTOS (Crowdfunding) | Jean-Luc Aufranc, CNX Software

By March 4, 2022March 14th, 2022No Comments

MangoPi-Nezha MQ tiny developer board with Allwinner F133-A (aka Allwinner D1s) RISC-V processor with 64MB on-chip RAM has just launched on Crowd Supply for $39, and delivery is expected in July 2022.

The 4x4cm development board comes with a MicroSD card slot, display and camera interfaces, an on-board microphone, as well as WiFi connectivity, two USB Type-C ports, and two 22-pin headers for expansion.

MangoPi-Nezha MQ specifications:

  • SoC – Allwinner F133-A 64-bit RISC-V processor @ 1 GHz with 64 MB DDR2
  • Storage
    • MicroSD card slot
    • Footprint for SPI NAND/NOR flash
  • Display I/F
    • 15-pin FPC connector Raspberry Pi DSI display
    • 40-pin FPC connector for RGB display with 4-wire resistive-touch interface
    • 6-pin FPC connector for capacitive touch
  • Camera I/F – 24-pin DVP interface (usable as RMII)
  • Audio – On-board microphone, audio output via 2-pin header (unpopulated)
  • Connectivity
    • 2.4 GHz WiFi 4 via Realtek RTL8189 module plus u.FL antenna connector
    • 10/100Mbps Ethernet (RMII) via DVP camera interface (add-on board)
  • USB – 2x USB Type-C ports with one USB OTG port and one USB host port
  • Expansion – 2 x 22 pin expansion headers
  • Misc – Boot/Fel & Reset buttons
  • Power Supply – 5V via USB-C port
  • Dimensions – 4×4 cm (four fixed assembly feet)

Read the full article. 

Stay Connected With RISC-V

We send occasional news about RISC-V technical progress, news, and events.